Item # 9195
ecoONE® Pre-Filter Technical Specifications
The ecoONE® Pre-Filter solves most startup spa and pool water problems without the use of chemicals. Saves money time and hassle by removing or reducing most common water contaminants before they get into your pool or spa. The convenient design will work on either end of a standard garden hose.
When tested against the National Sanitation Foundations Standard No. 53 “Drinking Water Treatment Units – Health Effects” the ecoONE® Pre-Filter water treatment unit met all requirements of the standard.
Size: 2-½ in. X 10 in. with FPT inlet/outlet
Weight: 1-¼ lb
Capacity: Up to 8,000 Gallons (depending on source water quality)
Flow Rate: 2 GPM
Temp range: 35F-100F
Working pressure range: 20-100 psi
The ecoONE® Pre-Filter is a combination of granular activated carbon (GAC) and a patented reduction/oxidation media that is classified by the EPA as a bacteriostatic. The combined media reduces or eliminates these contaminants:
Other Contaminants: Volatile Organic Contaminates (VOC’s), Hydrogen sulfide, Chlorine and its byproducts (THM’s), Fluoride, Nitrate, Arsenic, Endrin, Lindane, Methoxychlor, Toxaphene, Silvex.
The ecoONE® Pre-Filter has been tested to applicable NSF 42 & 53 standards by an independent lab to reduce and/or eliminate all contaminants listed. There are hundreds of other contaminants that the filter reduces and/or eliminates.
Calcites and lime/scale:
The ecoONE® Pre-Filter alters the molecular structure of calcite which inhibits its clinging capability. Calcium ions are removed from the water which changes calcite lime/scale deposits into aragonite. This alteration causes the lime/scale to remain suspended in the water where it cannot cling to equipment.
All materials used in the ecoONE® Pre-Filter are approved by the FDA for contact with foodstuffs including potable water. All thermoplastic/thermoset plastics used comply with the NSF standard 14.
“Simplify Your Spa... Naturally”