Super cleans pluming systems of hot tubs and whirlpool baths. No harsh chemicals. Safe for all spas and whirlpools.
A Dirty Secret
Even in chemically treated hot tubs deposits of scum, grime and sludge can form in the piping. This comes from body oils, dirt and other organic debris. It can be a problem in new spas that are wet tested before leaving the factory. The formation of these deposits in the piping can lead to excessive chemical demand and an unpleasant feeling and smell to the water. High amounts of chlorine or harsh chemicals are often used to deal with these deposits. This can lead to damage of the equipment and if done indoors can cause heavy chemical odors. High doses of chlorine or other harsh chemicals are not the answer.
A Better Way
SeaKlear Spa System Flush is a simple, effective additive that removes deposits of scum, grime and sludge. The performance is amazing and the effectiveness can be seen within minutes. Spa System Flush incorporates a milder cleaner with a great affinity to oils, sludge and grime. Pipes are cleaned and chemical demand is improved when using Spa System Flush at every draining.
Dosing and Instructions
Remove filter. Turn on circulation system to high with all jets running. Add ½ bottle per 400 gallons to the hot tub. Run through jets at high for 15 to 30 minutes. Drain water and clean spa shell. A small amount of Spa System Flush on a sponge can be used to wipe down the residue on the walls. (rubber gloves should be worn). Use entire bottle for hot tubs over 400 gallons. Reinstall filter, refill and balance hot tub water. Bottle label warning: Caution – Spa System Flush should be stored out of the reach of children and may cause eye irritation and should not be ingested. Shelf life is 5years.
You may also be interested in the following products
-
Super Shock
Starting at: $21.99
-
Hayward In-Ground Super Pool Pumps
Starting at: $364.99
-
Swimming Pool Chlorine - 3" Tabs
Starting at: $39.99
-
Kreepy Krauly Pool Cleaner
$399.96
-
Swimming Pool Water Slide
$109.99
