DISCOUNTED RETURNSOur Discounted Returns section features swimming pool supplies and equipment that customers have returned. Some items are brand new and repackaged, some slightly used and some may have cosmetic damage but all have been inspected, work great and come with full factory warranties. All Discounted Returned items have limited quantities and are available only while they last. Please note: for Discounted Returned items our normal 14 day return policy does not apply and returns will be accepted for warranty issues only.
Wi-Fi! Control your robot remotely for spot cleaning problem areas in your pool! Power Stream Mobility System enhances navigation for complete coverage – pool walls, floor and waterline! 4,000 GPH suction rating with dual scrubbing brushes for better cleaning. Extra-large capacity, easy access top-load filtration. Anti-tangling patented swivel cable. Ideal for pools up to 50 ft. 2-year limited warranty.
Tip 1: How long can I leave my Dolphin in the pool? We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.
Tip 2: How to take the robot out of the pool: Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the blue floating cable.
Tip 3: How to clean the filters: Cleaning the filters are simple. Just remove the filter(s) from the robot, release the latch to let the dirt and debris fall out, and then hose off any remaining debris. Do not let the filters dry out before cleaning them. Clogged filters reduce the effectiveness of the cleaning. We suggest cleaning your filters after every use.
Tip 4: How to setup the power supply: Important Reminder: The power supply for your Dolphin is not waterproof- it is water resistant. Keep protected from the elements. Make sure the power supply is placed at least 10 feet from the edge of the pool. Connect the blue floating cable to the power supply, align the connector with the notch of the plug on the power supply, then turn clockwise. Press the power button on the power supply to begin cleaning. When in use, make sure the power supply is either stored on the caddy (not included) or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.
