Doheny's Acrylic Deck Coatings

Read All Directions Thoroughly Prior to Use

Description: This product is formulated to beautify and upgrade textured concrete deck surfaces while providing a safe, non-slip finish. This durable product is water-based, featuring soap and water clean-up, and allows a concrete deck or patio to return to service in 48 hours. The coating is colorfast, UV resistant and excellent for restoring bare or previously painted concrete surfaces. Applications and surface temperature shall be above 50˚F. Keep from freezing. Do not apply when rain is imminent. New concrete and plaster surfaces must be cured a minimum of 28 days prior to painting. Do not apply this product on surfaces treated with a curing agent as use of these will adversely affect adhesion.

Mixing: Mix to uniformity by mechanical mixing. Mechanical mixing includes the use of a paddle mixer and drill motor or mechanical shaking equipment. Mixing with a stirring stick is NOT recommended. Multiple containers should be inter-mixed (boxed) in separate containers to ensure color uniformity.

Surface Preparation: PREVIOUSLY PAINTED AND NEW BARE CONCRETE SURFACES - Surfaces must be free of dirt, chalk, oil, loose paint, and other foreign matter which could prevent proper adhesion. This typically can be achieved by power washing the surface first using a 3500 p.s.i. unit. Previously painted surfaces must be abraded with coarse sandpaper or brush blasted to remove gloss and roughen the surface prior to cleaning. Coating performance, in general, is proportional to the degree of surface preparation. Follow recommendations carefully, avoiding shortcuts. Inadequate preparation of surfaces will virtually assure inadequate coating performance. TSP Solution should be used on all nonepoxy-based coatings or bare concrete. TSP solution dissolves mineral deposits and increases porosity to create maximum adhesion. Use a minimum 3500 P.S.I. power washer to remove solution. Follow package directions carefully for paint or epoxy application.

Application: This product should be applied by brush, 3/8” nap roller, or spray. Application is recommended early in the day or late in the afternoon when at least 2 hours of sunlight remain after completion of the job. Touch up any bare spots with one coat of this product. Apply 2 coats of this product to new or bare concrete surfaces, and 2 coats of this product to previously painted surfaces at the recommended coverage rates. In areas of low humidity (less than 20% and high temperatures over 90˚F) dampen the surface to be painted with a fine mist water spray prior to painting. Coverage and number of coats will vary depending on porosity and texture of surface. One gallon covers 160 sq ft. Allow 4 hours drying time to recoat.

Maintenance: Recoating of small area touch-up can be made at any time by following recommended application procedures. Refer to Safety Data Sheet (SDS) for precautionary information. USE ONLY WITH ADEQUATE VENTILATION. Do not breathe vapors or spray mist. Ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness, or if air monitoring demonstrates vapor/mist levels are above applicable limits, wear an appropriate, properly-fitted respirator (NIOSH/MSHA) during and after application. Follow respirator manufacturer's directions for respirator use. Close container after each use. Wash thoroughly after handling.

Shelf-Life: 3 years from date of manufacture.

Safety Information: DANGER. MAY IRRITATE EYES AND SKIN. Do not mix with chemicals other than those instructed. Do not swallow. Do not get in eyes. Do not get on skin or clothing. Do not smoke. Handle with care. Do not breathe fumes. Suspected of causing cancer. Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure. KEEP OUT OF REACH OF CHILDREN. THIS CONTAINER IS NOT CHILDRESISTANT ONCE OPENED. ENSURE TO CLOSE LID BY TAPPING LID IN PLACE WITH A RUBBER MALLIET IF ENTIRE CONTENTS IS NOT USED ON OPENING.

Additional Precautionary Information: Store and use the product in a wellventilated area. Wear protective gloves, protective clothing, eye and face protection. Dispose of contents in accordance with local, regional, national, international regulations. Contains 230 grams of VOC per liter less water and less exempt solvent

First Aid Treatment: Contains titanium dioxide and crystalline silica. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if applicable. If swallowed: Seek medical attention or call a Poison center/doctor immediately. Do not induce vomiting unless directed by a physician or poison control center.

Disclaimer: The performance of any paint or coating depends on many factors outside the control of The Company including surface preparation, proper application and environmental conditions. Therefore, The Company cannot guarantee this product's suitability for your particular purpose of application. To the extent consistent with applicable law, The Company EXPRESSLY DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE or otherwise that extend beyond the statements made on this label, and shall not be liable for special, incidental, or consequential damages resulting from the use or handling of this product, the exclusive remedy being the replacement of this product or refund of the purchase price of the product, at The Company's sole discretion. To the extent consistent with applicable law, buyer/user assumes all risk of possession, handling, or use of this material when use and/or handling is contrary to label instructions.

Warning: Cancer - www.P65Warnings.ca.gov

VOC: less than 240 g per L (mixed). DO NOT THIN.

*May be present in some colors