Do you want to add years to the life of your new liner? Make sure to install the pool cover around the bottom, inside circumference of your pool wall before replacing your pool liner. This will help prevent premature wearing and excessive stretching. Pro-Grade "Snap In Place" Track Cove has a thick plastic track that snaps into the area between your pool wall and bottom track - for a life-long fit! Available in 48 inch lengths. Why density matters in pool cove? Water pressure on the cove is directly proportional to the depth of the water. The deeper the water, the more pressure on the cove. The higher the density, the lower the amount of air in the cove. Air will compress over time, resin won't. If the cove flattens over time, the liner will become stressed and possibly even pull on the wall structure. Pro-Grade Track Cove is rated at 2.0 pounds per cubic foot. Available in 48-in length multi-packs according to your pool size for ordering convenience.
Gladon 48 in Pro-Grade Track Coves

Low As $17.99
In stock
- Brand
- Gladon
Item 4975P
Low As $17.99
- Add years of life to your above ground swimming pool liner with Gladon 48 in Pro-Grade Track Coves!
- Adding Pool Cove prevents excessive stretching and premature wear on above ground pool liners by providing an angled transition for your pool liner from the pool wall to the pool floor.
- These super-deluxe Snap-In Place Bottom Cove style track coves include a unique rigid plastic backing strip that fits snuggly in the pools bottom track with the pool wall – making it an easier installation process. Snap-In Bottom Cove pieces are 48” long and can be purchased by the piece.
- We have created easy to purchase Pro-Grade Snap-In Bottom Track Cove kits so you can purchase by your pool’s approximate size – taking the guesswork out of it! Each piece is 48” long.
- A MUST when replacing your liner!






















