Ramuc Hi-Build Epoxy 2 Gallon Pool Paint, Black

Ramuc Hi-Build Epoxy Pool Paint is formulated to provide a superior, long lasting satin finish without priming. Hi-Build Epoxy Pool Paint is perfect for renovating aged concrete, plaster, and fiberglass surfaces with up to 8 years of service life. It is an easy alternative to re-plastering. This paint is chemical resistant.

Two gallon kit with an easy to use one to one mix ratio. Covers up to 125 sq. ft. per gallon (250 per kit). Bare concrete require two coats. Only available in 2 gallon kits.

• Satin Finish
• Up to 8 Year Service Life
• Two Gallon Kit
• Easy alternative to replastering

The Olympic Zeron Epoxy Pool Coating One Coat Finish System!
Longest Lasting
High Gloss Finish
Alternative to Plaster

Olympic Zeron Epoxy Pool Coating provides a durable "ceramic-like" finish that lasts up to 8 years. This strong pool coating inhibits algae growth and is an economical alternative to replastering your pool. We recommend this paint for new pools or to refinish rough, discolored plaster. It's also great for sealing hairline cracks. Resists many common pool stains.

One gallon covers approximately 150 sq. ft. For best results pool should be primed first with either Poxoprime II or Gunzite Primer. Includes painting instructions.

3547 Epoxy Paint Thinner: Use for clean up.

Use this quick formula to calculate how much paint you'll need for your pool.
Rectangular and Oval Pools: L x W x 1.65 = total square ft.
Lazy "L" pools: L x W x 1.5 = total square ft.
Free form pools: L x W x 1.6 = total square ft.

Ramuc Hi-Build Epoxy Pool Paint is formulated to provide a superior, long lasting satin finish without priming. Hi-Build Epoxy Pool Paint is perfect for renovating aged concrete, plaster, and fiberglass surfaces with up to 8 years of service life. It is an easy alternative to re-plastering. This paint is chemical resistant.

Two gallon kit with an easy to use one to one mix ratio. Covers up to 125 sq. ft. per gallon (250 per kit). Bare concrete require two coats. Only available in 2 gallon kits.

• Satin Finish
• Up to 8 Year Service Life
• Two Gallon Kit
• Easy alternative to replastering

The Olympic Zeron Epoxy Pool Coating One Coat Finish System!
Longest Lasting
High Gloss Finish
Alternative to Plaster

Olympic Zeron Epoxy Pool Coating provides a durable "ceramic-like" finish that lasts up to 8 years. This strong pool coating inhibits algae growth and is an economical alternative to replastering your pool. We recommend this paint for new pools or to refinish rough, discolored plaster. It's also great for sealing hairline cracks. Resists many common pool stains.

One gallon covers approximately 150 sq. ft. For best results pool should be primed first with either Poxoprime II or Gunzite Primer. Includes painting instructions.

3547 Epoxy Paint Thinner: Use for clean up.

Use this quick formula to calculate how much paint you'll need for your pool.
Rectangular and Oval Pools: L x W x 1.65 = total square ft.
Lazy "L" pools: L x W x 1.5 = total square ft.
Free form pools: L x W x 1.6 = total square ft.

Get a superior, long-lasting satin finish with Ramuc Hi-Build Epoxy Pool Paint. Hi-Build Epoxy Pool Paint is perfect for renovating aged concrete, plaster, and fiberglass surfaces with up to 8 years of service life and requires no priming. It is an easy alternative to re-plastering. This paint is chemical resistant.
Only available in 2 gallon kits.

Olympic Optilon Synthetic Rubber Base Paint
Get the same quality results as a chlorinated rubber base paint at a lower price! Apply over bare concrete, plaster or old rubber base for an attractive low-sheen finish. Do not apply over epoxy or unknown paints. Two coats are required over bare surfaces. First coat should be thinned with our rubber base paint thinner sold below. Includes instructions.

Olympic Optilon Synthetic Rubber Base Paint
Get the same quality results as a chlorinated rubber base paint at a lower price! Apply over bare concrete, plaster or old rubber base for an attractive low-sheen finish. Do not apply over epoxy or unknown paints. Two coats are required over bare surfaces. First coat should be thinned with our rubber base paint thinner sold below. Includes instructions.

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Olympic Optilon Synthetic Rubber Base Paint
Get the same quality results as a chlorinated rubber base paint at a lower price! Apply over bare concrete, plaster or old rubber base for an attractive low-sheen finish. Do not apply over epoxy or unknown paints. Two coats are required over bare surfaces. First coat should be thinned with our rubber base paint thinner sold below. Includes instructions.

Olympic Optilon Synthetic Rubber Base Paint
Get the same quality results as a chlorinated rubber base paint at a lower price! Apply over bare concrete, plaster or old rubber base for an attractive low-sheen finish. Do not apply over epoxy or unknown paints. Two coats are required over bare surfaces. First coat should be thinned with our rubber base paint thinner sold below. Includes instructions.

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner