Ramuc Type Ep Epoxy Pool Paint, Dark Blue

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner

Ramuc Type Ep Epoxy Pool Paint offers a hard, tough, durable finish, providing unsurpassed stain, chemical, and abrasion resistance for protection of concrete, plaster, gunite, and fiberglass swimming pools and spas. This two-component coating mixes to 1 gallon, produces a high gloss finish, and offers excellent coverage rates. Type EP Epoxy, has been a proven performer for more than 40 years, and is recommended for spas or whirlpools. Because of their chemical cure, epoxies are the paints of choice for indoor pools. All epoxy films will chalk (break down from the UV rays of the sun) over a period of time. This is a natural degradation of the top surface of the epoxy film. Limitations Eight-hour "pot life" when component A and B are mixed together Accent colors are not designed for application over the entire pool surface. Use accent colors for striping, depth markings, drain designations, etc. .Coverage: up to 450 sq ft/gal on re-coats.

Cleans up with Ramuc Thinner.

GREAT FOR THESE TYPES OF SURFACES FOR POOLS & SPAS

• Concrete
• Plaster
• Gunite
• Fiberglass

SPECIFICATIONS:

• Application: Roller/Brush/Spray
• Mixing: Mechanically mix
• Coverage: Up to 450 sq. ft/gallon on recoats
• Fill Time - Outdoor: 5 dry days
• Fill Time - Indoor: 10 days
• Clean-Up: Ramuc Thinner