Step Renew Resurfacing Kit for Vinyl Liner Pool Steps
Pool steps are used in very difficult environments and over time show the wear and tear of general use and continuous exposure to sun, seasonal heat and cold, moisture, and pool chemicals. DON’T REPLACE YOUR STEPS – RENEW THEM!
Olympic Step Renew provides a simple process to revitalize old and weathered thermoplastic, acrylic and fiberglass pool steps used in vinyl liner swimming pools. The Step Renew kit contains the tools, the cleaner, and the coating needed to easily renew your pool steps and extend their useful life.
- Complete Olympic Step Renew Instructions (English & Spanish)
- (1) Gallon Olympic Step Renew Epoxy Coating
- (1) Pint Epoxy Solvent
- (1) Quart Poxofill Epoxy Patching Compound
- (1) 1/2 Gallon No. 245 Prep Magic Clean & Etch
- (1) Bag of Anti-Slip Silica Sand
- (2) 2 inch Paint Brushes
- (2) 6 inch x 1/2 inch Nap Roller Covers
- (1) 6 inch Roller Frame
- (1) 7 inch Paint Roller Tray
- (1) Electric Drill Mixer Blade
- (1) Sheets of 60 Grit Sandpaper
- (1) Stir Stick
Olympic Step Renew Coating
- Technology: High Solids Epoxy Coating
- Colors: White - Kit Product Code 920/EA; Blue - Kit Product Code 921/EA; Gray - Kit Product Code 922/EA
- VOC: Compliant everywhere
- Sheen: Gloss
- Mix Ratio: 3:1
- Coverage: Kit provides enough material to coat one set of 8 foot wide pool steps
- Dry Cure Time: At 75°F or higher – to touch in 4 hours; to light foot traffic in 24 hours; to filling pool in 3 days. Lower temperatures and/or higher humidity levels may extend these times.
- Working Pot Life: One hour average
