Inlays Plastic Stick-on Installation Instructions
Posted:
November 06, 2018
Categories:
Manuals, Brochures & Instructions
Inlays Plastic Stickon Installation Instructions
1. Temperature
- The ideal application temperature range is from 60°F to 90°F (15°C to 32°C)
- Application is not recommended if the surface temperature is below 50°F (10°C)
2. Prepare Surface
- Ensure that the surface is clean, oil free and dry
3. Install Marker
- Remove the paper backing from the stickon
- Apply marker to the clean surface
- Press the marker firmly against the surface and hold for a few seconds to promote adhesion
- When finished, remove the plastic stickon protection film from the surface of the stickon
4. Finish
- Keep marker dry for 24 hours to allow the adhesive to fully cure
- Use non-abrasive cleaners
Recent Posts
Categories
-
Pool Opening & Closing
(19)
- Pool Opening (5)
- Pool Closing (14)
-
Chemicals & Water Treatment
(51)
- Algae / Algaecide (2)
- Balancers (2)
- Chlorine (5)
- Clarifiers & Enzymes (8)
- General Chemicals (23)
- Salt / Chlorine Alternatives (8)
- Shock (5)
-
Equipment
(72)
- Cleaners / Vacuums (28)
- Filters (10)
- Heaters / Heat Pumps (9)
- Pumps (19)
- Salt Systems (3)
- Solar (3)
-
Covers
(17)
- Leaf Nets (4)
- Safety Covers (9)
- Solar Covers (6)
- Winter Covers (8)
-
Maintenance & Pool Care
(46)
- Equipment Maintenance (12)
- Pool Maintenance (35)
-
Pools & Spas
(26)
- Pools & Pool Kits (10)
- Spa Care & Accessories (16)
-
Accessories
(41)
- Diving Boards (6)
- Liners (5)
- Pool Lifts (11)
- Slides (13)
- Winter (5)
- Measurements & Formulas (12)
-
Manuals, Guides & Warranties
(724)
- Measuring Forms (9)
- Warranties (67)
- Manuals, Brochures & Instructions (573)
- Guides (130)
- Videos (160)
- Reviews (3)